Search the forum,

Discuss We all make the occasional mistake in the Tile Adhesive / Grout Advice area at TilersForums.com.

Kyle Knowles

TF
Esteemed
Arms
Reaction score
1,050
Points
1,108
Location
Widnes
I'm currently doin a bathroom in travertine and tried to lay the ditra today using tilemaster lightweight standard set which ive just started using this job and .......... it just wouldn't stick to the fleece backing at all I had to use some weber spf which stuck like the proverbial poo to a blanket
 
O

One Day

It's just because it takes an unusually long time to achieve full bond strength.
Similar to the observations (moaning) recently about Anhyfix - that too only achieves full bond after a couple of days. But HECK - it really does stick well --- eventually.
 
H

hmtiling

I was really worried about using Kerakoll h40 ideal with durabase as it didn't seemed to have bonded that well the next day. Had to remove a tile on the same job a couple of weeks later and I struggled to separate the 2.
 

Kyle Knowles

TF
Esteemed
Arms
Reaction score
1,050
Points
1,108
Location
Widnes
No this stuff just don't stick at all the fleece back just compresses the addy but the add won't take to the back of the ditra at all and I used the same trowel and the same roller I always use
 
O

One Day

No this stuff just don't stick at all the fleece back just compresses the addy but the add won't take to the back of the ditra at all and I used the same trowel and the same roller I always use

Honestly now - how long did you leave it before trying to lift the Ditra?
 

Kyle Knowles

TF
Esteemed
Arms
Reaction score
1,050
Points
1,108
Location
Widnes
As I lay I always lift to check coverage and the coverage would of bin spot on if it had stuck to the fleece
Just imagine if the ditra was greasy or dusty that's the best way to explain it
 
U

Unused Account 1

I put ditra down last week used slow set without thinking .always use rapid set flexi on ditra
 

Kyle Knowles

TF
Esteemed
Arms
Reaction score
1,050
Points
1,108
Location
Widnes
Slow set is fine I used the tilemaster lightweight standard set and there sumat about it it just won't bond to the fleece
 

Reply to We all make the occasional mistake in the Tile Adhesive / Grout Advice area at TilersForums.com

There are similar tiling threads here

Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
893
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
658
Hi all. Just wanting some advice and wondering what the pros in here are using nowadays for...
Replies
4
Views
653
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
626
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top