Currently reading:
Timber Floor Not Level

Discuss Timber Floor Not Level in the Australia Tiling Forum area at TilersForums.com.

J

JMTile

I have Tiled a small bathroom Floor, it is running out of level by about 2 inches. I decided to follow the floor, but the bath panel is now showing that its not level. Should I have made it level and then leave the customer with a 2 inch step up/ dot and dab the tiles as the floors so out or tell the customer it couldn't be helped as their floor was so out!
Any advice would be Great!!
 
J

JMTile

Its a bathroom refurbishment here are the photos..

bath1.jpg bath2.jpg bath3.jpg bath4.jpg bath5.jpg
 
P

philrab66

I have Tiled a small bathroom Floor, it is running out of level by about 2 inches. I decided to follow the floor, but the bath panel is now showing that its not level. Should I have made it level and then leave the customer with a 2 inch step up/ dot and dab the tiles as the floors so out or tell the customer it couldn't be helped as their floor was so out!
Any advice would be Great!!

If it is only the bath panel she is worried about scribe in the bath panel you should have a bit to play with under the lip of the bath.
 
B

bcd-87

Also she was always at work when I was there so no one there to make a decision

Sorry to hear this mate.. whats the situation between you and the client ? can you talk things through ?
You had two options tile it level.. massive step i did this once the client freaked out !!! or tiles it as it is you can get a bath panel to suit the unlevel floor ould this be an option ? Client must pay for the wall tiling plus materials
 
R

Rizzle from the Portizzle

ok this is a game of poker so first you need to load your hand .i total agree with you and will come back and not leave a bad job behind me that you are not happy with .how much did the tiles cost .so i can get some more .to replace the floor .will she say ok .now you go back put the cash in her hand .and say it wont take me long to chop these up as i cant leave a bad job behind me .you have now paid for the replacements.now you hold all the cards .you wont get to chop any up .just wait for the rest of your money dont leave intill you have it .record all you are saying .every time i have played these cards.i have won .when dealing with rubbish bury them deap
 

Reply to Timber Floor Not Level in the Australia Tiling Forum area at TilersForums.com

There are similar tiling threads here

    • Like
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for tiling.I have removed the floor boards and plan to lay 18mm WBP plywood.The question is, what...
Replies
1
Views
655
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in preparation for tiling. A couple of days after there's a lot of very fine cracks which have appeared, you...
Replies
5
Views
833
Hi all, I'm hoping you can help with some feedback, please My parents are currently having a new bathroom installed, all stripped back to bare walls and floor. The fitter has done/hasn't done...
Replies
17
Views
676
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper. A plumber/builder fixed...
Replies
1
Views
847
    • Like
Hi, I am planning on tiling my concrete garage floor with porcelain tiles. The concrete was laid down several years ago by a previous owner, and it looks like it was also polished and sealed -...
Replies
2
Views
1K
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.

Advertisement

Top