F
Flintstone
That’s is atrocious!
-
Show us YOUR Work thread - 500,000 VIEWS and Counting! Last Post/Page - Please Add Your Latest Tile Projects
(Here is the old read-only thread, it has 125,000 tile pictures)
- Thread starter Nbke8kv
- Start date
- Replies 60
- Views 26K
- floor floor tiling over tiling
Search the forum,
Discuss Tiling failure over wundafloor in the Tiling on Underfloor Heating area at TilersForums.com.
B
Blunt Tool
That’s terrible feel for you
W
WetSaw
You can. Put it on YouTube and then link it in a post.
L
LM
WOW!!!
W
WetSaw
You can't tile a trampoline!
Quite clearly from the picture of the fixing "method" they used it was going to fail with or without the movement.
Hey all. Okay so the flooring all coming up and now I have a chance to get it done again... looking at the below pictures what would be your suggestion... go with an overlay board system again or pipe and screed in between joists??
Including pictures but my existing is hollow floor boards and my new is a floating floor on a concrete base??
Including pictures but my existing is hollow floor boards and my new is a floating floor on a concrete base??
Have a look at this ttps://www.cocoonwarmfloors.com/
Reply to Tiling failure over wundafloor in the Tiling on Underfloor Heating area at TilersForums.com
There are similar tiling threads here
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for...
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Good morning all.
After a little advice. I'll post pictures a bit later. However....
The...
Hi!
I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Hi all! Just wondering what the best advice is for book-keeping? Been self employed now for a...
Advertisement
Share This Page
New Tiling Questions
-
UK Schlüter-Systems Ltd will be in Reading on 15th May 2024.Hey all I have just found out that Chris Emery from Schlüter-Systems Ltd will be at Tileflair in Reading on Wednesday 15th May for a Q&A session! So if you are in the area see if you can pop...- Started by Lou
- Replies: 0
-
Tilers' TalkCreated a new forum category for Tilers' Talk covering all other countries. Please start a new thread of your own by clicking THIS LINK. (you need to be logged in to post)
- Started by Dan
- Replies: 0
-
I'm Looking For This Tile Porcelanosa Town White Polish 595mmI'm looking for a few Porcelanosa Town White Polish / Pulido floor tiles - badly laid in my new build and a few have cracked. One or two would be useful, I could use up to 8 to allow for some wastage.
- Started by nsafford
- Replies: 0
-
UK Question about tile sizesI have moved into a new house and want to tile the downstairs bathroom walls. Its not a big room but my wife likes the idea of a feature wall tile and then a grey / white tile on the other 3...
- Started by supersolid2
- Replies: 1
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s fine) but they went for wpForo instead of bridging...
- Started by Dan
- Replies: 0
Replies you've not seen
-
Setting Out Brick Slip Fitters WantedHi Joe If you're still interested in having brick slip fitters on board< i would be interested, and I enjoy fixing these and terracotta slips...
- Latest: Ken Bruty
-
2024 Show us all YOUR Tile Work (new 2024 thread)Very similar tile this. Theyve gone with a slightly paler green
- Latest: AliGage
-
outside corner in rectangle bathroomIt's important to avoid having too steep a slope before the trap, as it can lead to the water being siphoned out, which might cause blockage...
- Latest: Arthurmelo
-
UK Schlüter-Systems Ltd will be in Reading on 15th May 2024.Hey all I have just found out that Chris Emery from Schlüter-Systems Ltd will be at Tileflair in Reading on Wednesday 15th May for a Q&A session...
- Latest: Lou
-
Contract Ceramic Tilers DerbyshirePlease private message the original poster with your contact numbers. Don't put your number in public threads please, you'll get spammed. :) Ta...
- Latest: Dan