Thin Porcelain (attention Is Dangerous Use Google Translate)

[Italy]

Hello to all,
I wanted to open a trend regarding TP (thin porcelain).
I would like to focus here, all your experiences.
I am old but curious. and I want to know everything.
Use google translated (is ignorant).
if you do not write well bear with.
thanks antonio

 

[Old Mod]

Good luck! Hahaha

 

[Italy]

Good luck! Hahaha

yes,yes, master very good luck

 

[Italy]

i start,
last update Mapei course that I attended.
there was talk of new products ultralite s / 2 new lightweight adhesive and Mapelastic turbo.
Mapei says to lay T.P. is recommended ultralite s / 2, with drawing up in the same direction is on the wall / floor of TP.
this rule has been agreed with Kerlite, a major manufacturer of tp in italy

 

[White Room]

I use Tilemaster s1 as instructed by Ray at porcel thin....

 

[Italy]

Also I used s1, then last job with ultralite s 2

 

[Italy]

View: https://www.youtube.com/watch?v=Z0NZ_xyL7E4

 

[Italy]

View: https://www.youtube.com/watch?v=T2jwJvO9TSQ

 

[Rizzle from the Portizzle]

Also I used s1, then last job with ultralite s 2

what covarage did you get on the two and how did you test this ?

 

[Italy]

what covarage did you get on the two and how did you test this ?

if I understood.
floors and walls bathroom, kerlite 3 mm, size 1000x3000, 1800x1000 max cut. adhesive mapei ultralite s2.
7 mm for the wall. 3mm trowel for tile.
My opinion is 3 mm thick, better s2.
4/5 is good s1.
I could be wrong, the teacher is you. 🙂