Rubi Wet Cutter

[PlatBath]

Hi,


I've just recently joined the forum guys so any advice would be appreciated. We've got a job booked in and the bathroom is tiled completely in granite tiles. The bath and vanity base are around 15mm and the walls around 12mm. I've been looking at the Rubi 250 NL wet cutter but not sure wether the porcelain blade would be up to the job?


Any advice before I purchase?


Thanks
Matt


Platinum Bathrooms Ltd

 

[cam_low]

What size are the tiles ? What's your budget ?

 

[John Benton]

Not sure what the Rubi blade is like, but one thing is for sure - You will need to make sure the walls are suitable for taking the weight of granite!

Check the table out here for weights

http://www.tilersforums.com/tiling-forum/48551-tile-weights.html

 

[CJ]

I have a Rubi DW200N if interested? :smilewinkgrin:

 

[cam_low]

I have a Rubi DW200N if interested? :smilewinkgrin:

Me too

 

[CJ]

Me too

I saw him first. 😛rrr::lol:

 

[Mr T]

Nice lil motor cj

 

[PlatBath]

What size are the tiles ? What's your budget ?

The tiles are a random size in length up to around 750mm, all are 400mm wide. As for budget.... I was hoping to spend around £600 to £700. Was going to have a look if I could pick a well looked after second hand one?

Thanks

 

[CJ]

The above Rubi will cut up to 700mm with plunge.

PM if interested.

 

[White Room]

That cutter looks like there's next to no usage CJ.....

 

[CJ]

That cutter looks like there's next to no usage CJ.....

It really hasn't had a lot. It is "As New"

 

[White Room]

Might sound a silly question but why are you selling it.....

 

[CJ]

Might sound a silly question but why are you selling it.....

I'm only an ickle guy, I fill my undies lifting it into my van. It is collecting dust in my garage.

 

[PlatBath]

How much are you wanting for it CJ? Where abouts are you based?

 

[Gazzer]

How much are you wanting for it CJ? Where abouts are you based?

Location Somerset

 

[CJ]

How much are you wanting for it CJ? Where abouts are you based?

PM sent.

 

[DHTiling]

I used to nick name my old Rubi DW200 wetsaw .. Niagra falls :lol: ... it certainly chucked some water out.. make sure you wear a pinny 🙂

 

[widler]

The tiles are a random size in length up to around 750mm, all are 400mm wide. As for budget.... I was hoping to spend around £600 to £700. Was going to have a look if I could pick a well looked after second hand one?

Thanks

If you spending that much, buy a dewalt 😉

 

[DHTiling]

If you spending that much, buy a dewalt 😉

Or a Sigma 9P.. 🙂

 

[CJ]

I used to nick name my old Rubi DW200 wetsaw .. Niagra falls :lol: ... it certainly chucked some water out.. make sure you wear a pinny 🙂

Not supposed to fill until its dribbling over the sides David. :drool5: