L
LM
That’s good to hear as for it’s use on porcelain I like the look of it.
L
LM
Wedges will scratch a vulnerable tile also so for me that concern is cancelled out whilst comparing to RLS. The winding out doesn’t seem to be that troublesome. Have you e er used that auzzy ATR system, now that’s what you call a pain in the arse for work load.
Imagine cutting around a window and 3 taps in the same tile!!!!
It cant cut a 120mm hole ? WC Shower valve ?
I
Italy
no......
I
Italy
I'm quite disappointed with this purchase.
1 problem: power raizor that vibrates, after 2 months I have not yet
had news if it's normal like that or not.
2 problem: the loading pistons of the suction cups,
if you place the bars vertically, they go out alone and fall into the ground.
answer from raimondi: impossible that they fall alone.
3 problem: the locking nut in the breaking clamp was missing.
I put it.
4 problem: the slides of the suckers pressure lancets
come out. (problem solved with glue).
I did not expect all these problems with raimondi, quite disappointed.
www.youtube.com/watch?v=R7JSIG9PA38
www.youtube.com/watch?v=8xvthFusklY
1 problem: power raizor that vibrates, after 2 months I have not yet
had news if it's normal like that or not.
2 problem: the loading pistons of the suction cups,
if you place the bars vertically, they go out alone and fall into the ground.
answer from raimondi: impossible that they fall alone.
3 problem: the locking nut in the breaking clamp was missing.
I put it.
4 problem: the slides of the suckers pressure lancets
come out. (problem solved with glue).
I did not expect all these problems with raimondi, quite disappointed.
www.youtube.com/watch?v=R7JSIG9PA38
www.youtube.com/watch?v=8xvthFusklY
Last edited by a moderator:
O
Old Mod
Antonio I found the power Raizor vibrates, it was reduced by always using spanner to tighten locking nut on blade, after a number of times using spanner, vibration decreases.
I then changed grinder, it was a mistake! began to vibrate again.
Vibration was decreased again by continually using spanner.
And now I have gone back to original grinder and I must decrease vibration again. 🙁
It is not a good solution, but it appears to work s little.
The main spindle that carries blade should lock in to housing to become more stable, alas it does not.
O
Old Mod
Your spindle Antonio does not seem true. 😕
I
Italy
http://www.raimondispa.com/prodotti/novita-cersaie-2018-new-products-cersaie-2018/
alleluia, the last to publish the news in 2018
alleluia, the last to publish the news in 2018
Hi Antonio. I know its not the thread. Do you know who manufactures this tile Urbe Fume Natural 3000x1000 6mm thick ? Sounds Spanish to me
I
Italy
300x100 it should be kerlite, I'm going to check
Thanks. I am dealing with Turkish people. They have said that the tile is their collection made in Italy 🙄🙄
I
Italy
I did not find anything.........
the only Italian I know that does 300x100 is kerlite
the pioneer of thin porcelain. sorry
Thanks Antonio I believe they are from Turkey just like Italian design made in China Lol
I
Italy
.....
I
Italy
I
Italy
I was watching a little story of raimondi and .....
I made a discovery, beginning self-leveling rls production in 2009.
but ..... the rls project was since 2002 ... abandoned in a drawer
I made a discovery, beginning self-leveling rls production in 2009.
but ..... the rls project was since 2002 ... abandoned in a drawer
I
Italy
do you want other information marc? @3_fall
O
Old Mod
Is it in English? 😀
I
Italy
no sorry,
you know that in Italy we had a 24h tv channel
who spoke only of tiles? from raw material to final packaging?
on TV it does not broadcast anymore, but there is the internet channel.
Home - Ceramicanda - http://www.ceramicanda.com/?fbclid=IwAR2Uy6zgEnl0ifqyIEJFO-w5GqQ2HuDBU6AeUXmh4oD4mMxjVVahnIcN-iE
O
Old Mod
Thanks Antonio, appreciate that. 🙂
I
Italy
and you know that in Italy, there is now also the qualification course
ASSOPOSA for thin porcelain slabs?
I
Italy
look they do not speak Italian ...
they speak only in the dialect of Emilia Romagna ahh
I
Italy
I
Italy
there is also a qualification course,
for those who bring thin porcelain to the building site ...
how to download it, how to move it.
I
Italy
I finished Marc,
there is nothing left in Italy
I finished everything.
🙁
there is nothing left in Italy
I finished everything.
🙁
T
Time's Ran Out
Great name - ASSOPOSA!
I
Italy
do I have to translate John?
There are similar tiling threads here
Featured Threads
-
- F
- W
-
- I
-
-
-
-
Advertisement
Thread Information
Tiling Tools
Find the cheapest price for both professional and DIY wall and floor tiling tools in the UK. Brands such as Rubi, Genesis, Fein, Karl Dahm, isomat, Schluter, Tilemaster and more.