Hardie backer PDF - TilersForums.com

[Ian]

I was just having a look at the installation PDF to brush up on a couple of things, just thought I'd post it up incase anyone fancied a read. It was updated in July 2012.

http://www.jameshardie.co.uk/images...ent_backerboard_installation_guide_manual.pdf

 

[White Room]

Allways worth a good read.....

 

[Ian]

I had a blank and couldn't remember if they advised sticking with non-flexi or SPF, turns out non-flexi is advised. Always good to keep up to date with the technical side of the trade

 

[The D]

I was chatting to the rep the other day about the 100 KG and he said it had been tested to 4 ton :yikes:

 

[The D]

I had a blank and couldn't remember if they advised sticking with non-flexi or SPF, turns out non-flexi is advised. Always good to keep up to date with the technical side of the trade

is that on to ply??

 

[White Room]

A non-flexi to a timber floor ?

 

[Ian]

is that on to ply??

A non-flexi to a timber floor ?

Yeah, 15mm ply or 18mm chip board onto joists spaced no further than 600mm apart. Schluter recommend a non-flexi for sticking ditra down, even over UFH that's what made me look.

- - - Updated - - -

From page 2 on the PDF.

 

[The D]

Yeah, 15mm ply or 18mm chip board onto joists spaced no further than 600mm apart. Schluter recommend a non-flexi for sticking ditra down, even over UFH that's what made me look.

- - - Updated - - -

From page 2 on the PDF.

i use spf looks like i need to give them a call

 

[Perry]

Good at least they don't say it's waterproof you need to tank it unlike aqua board

 

[White Room]

That surprises me to use a non-flex.....