grout sealer

[mr mark sparks]

hi i have just had my kithen floor grout replaced as the old stuff had stained badly i have bought some sealer for the new grout but am wondering how long to leave the grout to dry before i apply it

cheers mark

 

[david campbell]

it depends on how long the grout manufacturer states the grout is dry,if 24 hours then i would use after that and so on

 

[DHTiling]

what sealer is it..?

 

[united]

As above it will tell you on the instructions, I would recommend following the instructions

 

[enduro]

I would use Aqua mix grout colorant straight away on that grout for fantastic grout protection. I use loads on floor grout.

 

[mr mark sparks]

the grout is excel bond flexible wide joint and should reach final set in 24 hrs
the sealer is fila grout protector

http://www.filafortch.co.uk/prodotti.php

 

[paul flight]

24 - 48 hrs then apply seal as instructed