R
radiocaf
Hi guys,
I was hoping for some advice, as I will be tiling tomorrow for the first time ever and want to do it right.
I will be tiling the walls of my bathroom with 600x300 Jakarta Vanilla Polished Porcelain Tiles, and when Google searching I came across this forum that seemed the most helpful. The adhesive I will be using is Mapei Adisilex P9 and the grout is Mapei Ultracolor in Jazmin colour. I also have a bottle of LTP Grimex for cleaning off a wax I was told the tiles are protected with, and a bottle of LTP MPG Sealer to seal them and make them waterproof. All of those products were recommended by the sales assistants who sold me the tiles at Tile Giant.
From looking at other posts on this forum, those "ingredients" seem to be the right ones, but my question is: In what order do I do everything?
Posts I have seen have suggested two main methods:
- Seal twice, Adhesive, Grout, Clean, Seal
- Adhesive, Clean, Grout, Seal.
The bathroom has been in a state for a week or so now, so I want to start getting the tiles on the wall, and this weekend is the only weekend I'll have free for a while, and the Mrs. is getting annoyed 🙂prrr::lol🙂, so the second option is more alluring to me, and is the one I am hoping is suggested. But I'd rather do it right and have it take longer than risk ruining a good 17m² of tiles, so if the second option seems to be the vote, then that will have to be it.
Any and all advice is greatly appreciated. Thank you!
I was hoping for some advice, as I will be tiling tomorrow for the first time ever and want to do it right.
I will be tiling the walls of my bathroom with 600x300 Jakarta Vanilla Polished Porcelain Tiles, and when Google searching I came across this forum that seemed the most helpful. The adhesive I will be using is Mapei Adisilex P9 and the grout is Mapei Ultracolor in Jazmin colour. I also have a bottle of LTP Grimex for cleaning off a wax I was told the tiles are protected with, and a bottle of LTP MPG Sealer to seal them and make them waterproof. All of those products were recommended by the sales assistants who sold me the tiles at Tile Giant.
From looking at other posts on this forum, those "ingredients" seem to be the right ones, but my question is: In what order do I do everything?
Posts I have seen have suggested two main methods:
- Seal twice, Adhesive, Grout, Clean, Seal
- Adhesive, Clean, Grout, Seal.
The bathroom has been in a state for a week or so now, so I want to start getting the tiles on the wall, and this weekend is the only weekend I'll have free for a while, and the Mrs. is getting annoyed 🙂prrr::lol🙂, so the second option is more alluring to me, and is the one I am hoping is suggested. But I'd rather do it right and have it take longer than risk ruining a good 17m² of tiles, so if the second option seems to be the vote, then that will have to be it.
Any and all advice is greatly appreciated. Thank you!
Last edited by a moderator: