Cloakroom - Tile Advice

[etaf]

Hi
I just joined the forum as about to start out on a 2nd project with a lot more tiling

I recently tiled a small porch , 14 porcelain tiles, all cuts were hidden 30x30 which was OK but took a while. i used a continuous 125mm diamond blade on a dewalt grinder

Now i'm doing a cloakroom , 2 walls 2.1m x 0.9 high and 1 tile along the back wall.
the cuts now need to be straight and no chipping as all on show
10x30cm ceramic tiles with a bevel pattern on

Posted a question on the wet tile cutter in the UK DIY forum.

Wet Cutter Machine Advice

I searched but did not find an answer. I been advised to get a wet tile cutter, I plan to cut 10x30cm ceramic tiles , maybe about 40 tiles will need cutting, to go up against a vanity unit and the door frame , and 1 set across the back of the room, so a mitre would be good for those tiles I...

www.tilersforums.com

Thats my experience of tiling, previously my brother has done the work for me , but that's not possible now, and i have never tiled before

lookforward to reading a few of the posts and tips

 

[Lou]

Welcome to the forum, how are you getting along?

 

[etaf]

Thanks, just striped the cloakroom and loft out, now working out the floor and pipework,
Tiles arrive on Friday, not worked out what to use to cut them yet, still working that out
See my question here

Wet Cutter Machine Advice

I searched but did not find an answer. I been advised to get a wet tile cutter, I plan to cut 10x30cm ceramic tiles , maybe about 40 tiles will need cutting, to go up against a vanity unit and the door frame , and 1 set across the back of the room, so a mitre would be good for those tiles I...

www.tilersforums.com