etaf
-
Hi
I just joined the forum as about to start out on a 2nd project with a lot more tiling
I recently tiled a small porch , 14 porcelain tiles, all cuts were hidden 30x30 which was OK but took a while. i used a continuous 125mm diamond blade on a dewalt grinder
Now i'm doing a cloakroom , 2 walls 2.1m x 0.9 high and 1 tile along the back wall.
the cuts now need to be straight and no chipping as all on show
10x30cm ceramic tiles with a bevel pattern on
Posted a question on the wet tile cutter in the UK DIY forum.
www.tilersforums.com
Thats my experience of tiling, previously my brother has done the work for me , but that's not possible now, and i have never tiled before
lookforward to reading a few of the posts and tips
I just joined the forum as about to start out on a 2nd project with a lot more tiling
I recently tiled a small porch , 14 porcelain tiles, all cuts were hidden 30x30 which was OK but took a while. i used a continuous 125mm diamond blade on a dewalt grinder
Now i'm doing a cloakroom , 2 walls 2.1m x 0.9 high and 1 tile along the back wall.
the cuts now need to be straight and no chipping as all on show
10x30cm ceramic tiles with a bevel pattern on
Posted a question on the wet tile cutter in the UK DIY forum.
Wet Cutter Machine Advice | | Tilers Forums
Wet Cutter Machine Advice in the Tile Cutters (Manual & Wet Cutters) on Tilers Forums.
www.tilersforums.com
Thats my experience of tiling, previously my brother has done the work for me , but that's not possible now, and i have never tiled before
lookforward to reading a few of the posts and tips
