How long will a job like that take ?
2mm grout lines floor 1200x600x10mm Porcelain tile
- Thread starter Simons70
- Start date
Tilers Forums Official Sponsors
J
Joseph Kover
Won't be an easy one, good luck mate
Nice project though
On paper everything is easy 🙂
S
SJPurdy
The set out of 2mm grout lines is dependant on the tiles actually being spot on 1200, 600, 300mm dimensions. if the tiles are 1mm less then the joints will be 3mm to keep the same drawing set out; if the tiles come larger than spec then the designer may need to have a rethink.
As stated earlier the BS 3mm is a recommendation which it is wise not to exceed (i.e. go less than) unless someone else suitably qualified is taking the responsibility - presumably the architect/designer in this case.
As stated earlier the BS 3mm is a recommendation which it is wise not to exceed (i.e. go less than) unless someone else suitably qualified is taking the responsibility - presumably the architect/designer in this case.
U
Unused Account 1
Use 3mm to give yourself a better chance ,they wont realize,unless you have a start point ,if used cad cam,will change some of the cuts over that size area
O
One Day
Bs5385 is woefully outdated in many places. This is a direct result of failing to consult and work with tilers on modern practises. 2mm on ditra using a porcelain will be fine. Depends on the quality of the tiles of course!
O
One Day
And before anyone claims that you will be covering yourself and your liabilities by sticking to British standards, No, you won't. 2mm is such a common practise that as well as having no adverse effect, you wouldn't face it as an 'issue' if you're held to task on other aspects of your fixing.
W
WetSaw
The really sad thing is that millions of people will walk over that and probably never even notice it let alone the work involved in fitting it.
There are similar tiling threads here
- Tilers Talk BB
- Tilers Talk - Any Country
