Are there any tips on how to carry the herringbone pattern onto a window sill. I’m tiling my cousins kitchen and every time I align one tile up with the joints on the wall the others don’t match up.
We had a new tile shower installed with an oil rubbed bronze liner/pencil as the trim tile around the wall tile. The problem is the installer applied a 1/4 inch of line of grout between the liner and the wall. Although the grout is a dark color, it is not as dark as the liner and looks bad. I...
I am cutting 16mm porcelaine paving with a Vitrex bridge cutter.
I fitted a Vitrex Ultimate blade to replace the standard blade. It cuts better, with less chipping but on a 600mm cut it walks off line by 3mm.
The saw runs true and the standard blade cuts true but it chips like a MF.
So any...
Hi, I'm not sure if this is the right place to post but I'm hoping for some advice.
About 2 months ago we had our bathroom redone and all was fine until last night when a line of 4 tiles spontaneously cracked over a period of 20 minutes while my son was having a bath. The line runs from the...
Hi,
I bough two types of tiles, one of them being 300x600 rectified split face for a future wall, and the rest 300x600 marble.
Only after laying few raws of the split face and one of the marble on one wall, I found out a day after that the joints don’t line up at an internal corner - I know...
Hi Folks
Anyone got this, is it worth it. Whats it like in bright sunlight and will it also cast a 90 degree on the floor like the bosch GTL3.
Is there better for the same sort of money in green.
Thanks
I just need one or two of these to complete a bathroom wall that was half-started by the house builders...
And can't find them for love nor money!
Thanks
Laura
Hi All, about to tile my bathroom walls with 600mm x 150mm tiles and not sure whether to use 2mm or 3mm grout lines also using the same tiles on the floor what would the grout line size normally be with the floor tile, Thanks in advance.
The attached image shows a hair line crack on some cement floor tiles about 4 ft in length that starts at the wall and runs to the middle of the room. The tiles were laid by a professional about 14 months ago in my upstair bathroom - regular 1960 's timber frame house. There was also some...
Hi has anyone on here or does anyone on here do tiling on modular homes in a factory on a production line? Just wondered if it was easy work difficult how it all works.
Cheers josh
Hello all, im going to buy a floor laser line level this weekend, but no idea which one. Whats your views. After some research and asking a few friends ive come up with
Stabila FLS 90 - Anyone own this or have an opinion?
PLS FT90 - Anyone own this or have an opinion?
If there are others any...
I'm considering using a tile levelling system with porcelain tiles 600mm x 300mm on both the walls an floor. The system I intend to use is the tile lash copy type (wedges and plastic clips) however I can only find ones with grout line spacing of 1.5mm,
Is that too thin for floor tiles which I...
what
Thread
grout
leveling
leveling system
levelling
levelling system
line
system
thin
tile
tile grout
tile levelling
tile levelling system
Hi,
About a year ago I got my kitchen tiled by a professional tiler. The tiles have started to crack along the joins of the 18mm WBP. The WBP was put down by myself. Looking back I have realised I laid it wrong - the long long crack is where the Plywood is 90 to the floorboards and not the...
I've been on a job today and there has been a lad fitting kahndean flooring, multiroom, about 40m, anyway, been watching his prep as floor was bad, today he's been using these straight edges that are made of thin metal that roll up into a small roll, he had about 4 of them, from 2m to longest...