Tiling Tools Starter Kit - TilersForums.com

[DHTiling]

Tomtom one....

 

[Gazzer]

I have a TomTom too but mine is on a PDA. I need to update soon to a better model.

 

[Hawkmoon]

In addition
Combination square ()
Laser level (http://tinyurl.com/qg9mof)

 

[doug boardley]

In addition
Combination square ()
Laser level (http://tinyurl.com/qg9mof)

not an essential bot of starting out kit though imo, a good brand spirit level is though, a 2 foot, 4 foot and six foot and a boat level too are more desirable

 

[baz1967]

floodlight with a 500W halogen bulb.great for pre grout clean up and post grout final polish.ok it gets a bit warm working in a small bathroom,but the results are spot on...A MUST HAVE FOR ALL JOBS.

 

[Hawkofeagles]

Not sure if it's been mentioned but a mixing paddle..

 

[honza1]

What is your estimated price for this 1000 item starter pack?

 

[EH TILING]

an extension reel 110/240 always comes in handy!

 

[ragamuffin]

your all forgetting the most important tools
no 1 on list kettle
no2 Dustpan and brush

i use a flask an you can just nick the dustpan and brush from the sparkey are plumber. lol

 

[Andy Allen]

a fan heater to stick in a room for winter so your not sat in the van for 3 weeks waiting for a floor to dry

 

[DHTiling]

a fan heater to stick in a room for winter so your not sat in the van for 3 weeks waiting for a floor to dry

Thats what i have... mines a delonghi 3kw...

 

[kent tiler]

no one said a good SDS drill or even a good set of plastering tools if your doing all the prep work too board and door lift for triming doors and a good set of pushfit pipe stops at hand :mad2:

 

[DHTiling]

You just did..

 

[The Legend; Phil Hobson RIP]

One of my most used tools used to be the bottom of the old thermos flask, it made a great template for soil pipes. These days I use the single suction pad, gives you just the right tolerance.

 

[doug boardley]

One of my most used tools used to be the bottom of the old thermos flask, it made a great template for soil pipes. These days I use the single suction pad, gives you just the right tolerance.

same here Phil, altho my 110mm core bit does too