Stand for manual cutter?

[Fizzyhair]

I was wondering what you all use as a stand for your snap cutters. Atm I'm using saw horses with a ply board. But it's too big for most spaces inside.
I wondered if a mitre saw stand would work?

I'm actually surprised company's like rubi and sigma dont make stands for the premium cutters. Theyre missing a trick lol. I have a tx700n cutter.

 

[One Day]

I use keter folding work tables.
Rubi Raimondi and sigma all make specific tables for their cutters.

 

[Albert]

These are pretty good

 

[Dougs Third Go]

I just use folding work platforms with 25mm plywood.

 

[GoneGuy]

I use one of these https://www.screwfix.com/p/mac-allister-folding-workstation/2320p

 

[acaciaguy]

I use one of these https://www.screwfix.com/p/mac-allister-folding-workstation/2320p

I have two of the same ones. They are great. You get clamps with each too

 

[One Day]

That's a keter folding work table. Just made for screwfix?/ b&q.

 

[Flintstone]

Yeah it's same. I've got one for manual cutter, I used to use one for grinding until it caused me spinal issues ! Had to get something higher

 

[Sean Kelly]

 

[Fizzyhair]

The macallister table is a great suggestion. It's a full on workstation. Bought one today worked great. Thanks guys!

 

[Fizzyhair]

Actually turns out a mitre saw stand is a great alternative too?