Small Holes in Top of Replica Flagstones

[Mike Mike]

At least they haven't gone rusty, unlike someone's very expensive limestone.... :mad2:

 

[White Room]

Be honest not sure where to go from here but it dos'nt look right after a short period of time....

 

[AndyH747]

What I would need to take the matter further is an independent report on the floor so I have proof its a defect. Could anyone recommend someone in my area (near Gloucester) that could carry this out? Obviously I would pay for the inspection and report. I would then claim this back from the retailer should the report find an inherent defect.

 

[DHTiling]

Can't beat proper REAL stone... leave the imitation stuff in the skip..


to reply to the OP... not heard of this type before.. doesn't look good either way... have you expressed your concerns to the supplier.

 

[AndyH747]

Can't beat proper REAL stone... leave the imitation stuff in the skip..


to reply to the OP... not heard of this type before.. doesn't look good either way... have you expressed your concerns to the supplier.

See my previous posts! Have informed them several times.

 

[DHTiling]

Sorry i just scanned through...


any joy then..?

 

[AndyH747]

Sorry i just scanned through...


any joy then..?

Like I've already said, they refuse to examine the floor, have said air bubbles are normal and there's nothing they can do/are prepared to do about it.

Hence my request for someone to carry out an independent report so I can take further action.

 

[DHTiling]

Never!!!, that is shocking....

I hope you get some satisfaction..

 

[Al@Lifetiles]

If "they" are saying air bubbles are normal then maybe "they" should have pointed this out before you bought this stuff.
Either way you are left with a floor that doesnt look how you wanted.
My only positive contribution to this would be to suggest a resin filler to match replica.

 

[AndyH747]

If "they" are saying air bubbles are normal then maybe "they" should have pointed this out before you bought this stuff.
Either way you are left with a floor that doesnt look how you wanted.
My only positive contribution to this would be to suggest a resin filler to match replica.

They didn't point it out and we didn't notice in the showroom. However I didn't get down on my hands and knees to examine them!

Where would I get the resin to fill the holes?