Silicone this bit or leave it? - Tile Advice

[alan0259]

Finished the tiling and grouting and the wooden strip has been removed, just wondering if I should put some white or black silicone under the tiles?

There's the black beading on the top but I didn't put it along the bottom.

Should I just leave it alone? What would you guys do?

Cheers.

 

[Time's Ran Out]

If that area is for the free standing cooker to be pushed into, I'd put another row of tiles down so it looks as though you've gone down to the skirting/ or tile down to the skirting.
Or you can leave it as it is, no need for silicone.

 

[alan0259]

A fridge/freezer is going there.

I'll just leave it, the row of tiles is the same around the kitchen.

Thanks

 

[DHTiling]

I would leave it as well...

 

[CJ CERAMICS]

as per above no need to silicone there

 

[kilty55]

i would drop it if possible by another row at back so it looks like it goes to the floor

 

[Qwerty]

i would drop it if possible by another row at back so it looks like it goes to the floor

My choice too

 

[chris.tiling]

I'm another of the "add another row to the bottom" brigade

 

[Time's Ran Out]

I think their should be a Poll - 4 for / ? against another row.

 

[enduro]

Another row at the bottom :smilewinkgrin:

 

[The Legend; Phil Hobson RIP]

Another row for me

 

[Bathfix Bob]

Ah so the trick is only make it look like its been done properly?

I'd tile all the way down the the skirting. :hurray: