Self Levelling Compound issue (pictures) - TilersForums.com

[JordanLincs]

Did you prime the floor with eco prime t?

I used mapei primer G, is this incorrect@

 

[Spare Tool]

Why haven’t you took the toilet out.

Well it ain't coming out now....or ever!!

 

[JordanLincs]

Well it ain't coming out now....or ever!!

You got that right! Good job it's family and bathroom is gonna be demolished.

 

[Boggs]

I’ve never use this Mapei slc before, but it does look a bit cloudy, like it’s not mixed right.

As said above always mix the whole bag, but I tend to hold back a handful in the bag as it just allows the mix to be a bit better at flowing without affecting its strength.

 

[JordanLincs]

I’ve never use this Mapei slc before, but it does look a bit cloudy, like it’s not mixed right.

As said above always mix the whole bag, but I tend to hold back a handful in the bag as it just allows the mix to be a bit better at flowing without affecting its strength.

Appreciate your advice, thankyou.

Although, I was very careful when halfing the bag, I had weighing scales. Still recommend to use the whole bag? Do you use the whole bag as the fibres may have settled at the bottom?

 

[JordanLincs]

Let the games begin! Any ideas why this has happened?

 

[Bond]

 

[Boggs]

Yep.

The thing with slc is not to worry about it, follow the instructions on the bag and don’t play around with it.

Mix, pour and smooth out with a spiked roller.

 

[Bond]

Done the above floor yesterday with Mapei ultraplan perhaps the best slc I’ve used, was able to walk onto this floor without marking it in 4 hours.
The residue in your backed looked a bit off colour.

 

[Bond]

The residue in your bucket.