Done the above floor yesterday with Mapei ultraplan perhaps the best slc I’ve used, was able to walk onto this floor without marking it in 4 hours.
The residue in your backed looked a bit off colour.
But if you only mixed half the bag then the fibre to aggregate ratio is no longer correct meaning you probably have more fibres in the floor than aggregate to set it.
To be honest it doesn’t matter how long it was mixed for or how fast or slow it was not going to be right.
But if you only mixed half the bag then the fibre to aggregate ratio is no longer correct meaning you probably have more fibres in the floor than aggregate to set it.
To be honest it doesn’t matter how long it was mixed for or how fast or slow it was not going to be right.
I mix part bags all the time. Experience tells you if it’s too wet or too dry. Did you let the mix stand long in the bucket? It looks fine to me on the floor. With renovation screed I always use eco prime t although it states primer g is ok in certain circumstances.
As Marc says don’t worry about it tonight if when you next walk on it it’s solid enough and a light poke with a scraper can’t do too much damage to it it’ll be fine.
What tiles are you laying around the toilet?
Eco prime will help it stick better to the floor as it’s a water based compound. That’s not to say it won’t stick with primer g, I think you’ll be fine.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.