Rounded corner of bath, trim problem! - TilersForums.com

[MarkSS]

Any ideas? This is what my tiler has done. It’s a carron integra bath.
Nothing else to do but recess the frame more and put up with an overhang?

 

[macten]

I know this is only one side in the pic but I always bring it out and have a little ledge if the bath is going round two sides and/or curved too much to get flush.

 

[Albert]

This might do the job

 

[MarkSS]

Thanks. Not to keen on the ledge but I can see what you mean.
We’re going to try this on a cut back tile.

 

[Albert]

Here is another way

 

[MarkSS]

Here is another way

Won’t that still leave the top edge of the tile exposed?
Ideally a corner trim of about 30mm radius would do it. Bloody hell however much you plan something always goes Pete Tong

 

[Italy]

........ old style

 

[MarkSS]

........ old style

View attachment 99074

Trim on top edge as well? I guess ...

 

[MarkSS]

I think we’re going to go for the ledge

View attachment 99071

I know this is only one side in the pic but I always bring it out and have a little ledge if the bath is going round two sides and/or curved too much to get flush.

View attachment 99072

looking like the best solution, had originally decided against a deck for space but a think ledge is looking good. Thanks.
Like below, build a skirting frame.

 

[WetSaw]

Trim on top edge as well? I guess ...

No trim, a mitred strip on the corner.

 

[Italy]

No trim, a mitred strip on the corner.

thanks pdc