Porcelain Tiles Chipping

[Stef]

Same & different.

 

[Italy]

Same & different.

View attachment 80921 View attachment 80922

stef we're talking about progres evo 2

 

[Italy]

I'm sure Alan @ATSDiamondTools would send you one @antonio, if you were to buy one!

?????

 

[Stef]

stef we're talking about progres evo 2

I've not used that one, it was the original pro-Gres that I had.
For the difference in performance & price I will stick to ATS blades as I'm more than happy with the cut.

 

[Italy]

I've not used that one, it was the original pro-Gres that I had.
For the difference in performance & price I will stick to ATS blades as I'm more than happy with the cut.

yes, is equal + - progres / progres evo 2.
I understood that you used tcs that I put pictures.
I'm not selling anything.
we're just here to understand what is best for tilers.

 

[Spare Tool]

Didn't mean to open a can of worms..
Progress Evo a very very good cut, ATS blade also a very good cut, this is blade Craig gave me to try, sure he said he'd got 2 delivered for £15. 6 blades for 1..
Antonio you try ATS and compare?

 

[Spare Tool]

@antonio...i retire soon

 

[Italy]

Didn't mean to open a can of worms..
Progress Evo a very very good cut, ATS blade also a very good cut, this is blade Craig gave me to try, sure he said he'd got 2 delivered for £15. 6 blades for 1..
Antonio you try ATS and compare? View attachment 80923

I'm available.
beware though, ats the comparison with TCS.
because of evo2 cutting finish. not have comparisons.

 

[Italy]

Thanks folks I did some dry cuts on off cuts and now cutting the tiles upsides down a lot less chipping hardly noticeable

The £20 plasplugs with a general cutting blade dose fantastic cuts absolute madness

Thanks everyone the cuts are good enough I'm going to run with it

Cheers Kenny Mac

and yes. it took again Italian. lol
the mafia, pizza, spaghetti, long hands and long tongue.
jokes.
for once . I did the right thing. ahahha

 

[Stef]

yes, is equal + - progres / progres evo 2.
I understood that you used tcs that I put pictures.
I'm not selling anything.
we're just here to understand what is best for tilers.

I haven't used the tcs blade, I used the original pro-gres blade & that is what my comparison is against.
I still use & own the Squadro blade from Montolit & a DNA blade in my Dewalt.