Mitre L cut metro tiles

[acaciaguy]

If you use trim you don’t need resin

 

[alecw255]

Sorry, I should have said, I'm referring to external corners with a mitre. I will be using a trim for the top edge of the splash back which is only 400mm high above the worktop.

 

[Italy]

I give up, I volunteer,
send me 2 packages of metros tiles,
I cut them all at 45 degrees
(the old ones called them jolly) while I eat a sandwich
at midday....🙂 🙂

 

[Waluigi]

Sorry, I should have said, I'm referring to external corners with a mitre. I will be using a trim for the top edge of the splash back which is only 400mm high above the worktop.

Akemi Poly Soft Resin
Akemi colouring paste to achieve a colour match.

Use a diamond polishing block to sand back. You’ll need a few different grades of Pad.

If mixing in colours get the colour spot on before adding your hardener. Mix up a big batch of the desired colour and then take an amount away from the batch to then add to your hardener. The reason for this is to keep a consistent colour match. Also it’s good to have a colour match in case you need to infill areas.

Good luck!

 

[alecw255]

Akemi Poly Soft Resin
Akemi colouring paste to achieve a colour match.

Use a diamond polishing block to sand back. You’ll need a few different grades of Pad.

If mixing in colours get the colour spot on before adding your hardener. Mix up a big batch of the desired colour and then take an amount away from the batch to then add to your hardener. The reason for this is to keep a consistent colour match. Also it’s good to have a colour match in case you need to infill areas.

Good luck!

Thanks for the advice!

I think we'll be going for a white grout and resin to match the tiles - keep it simple. I was kinda hoping there would be some pre-mixed colours available on the market for simplicity.

 

[Unused Account 1]

Unless it perfectly done look scrappy ,bits chip off the edges

 

[Waluigi]

Thanks for the advice!

I think we'll be going for a white grout and resin to match the tiles - keep it simple. I was kinda hoping there would be some pre-mixed colours available on the market for simplicity.

There are pre mixed colours available

 

[alecw255]

There are pre mixed colours available

Thanks @Waluigi, is that also an akemi product or something else?

 

[Waluigi]

Same product- a limited amount of colours. Try Apex Direct, they sell it.