How cut marble mosaic squares without crumbling?

[Dumbo]

Yea they do get a bit hot but the nice thick padded tongue is so comfy on the top of your foot when kneeling it's worth it to me, glad I could offer some useful advisadvise mate

No thankyou

 

[Simons70]

remove from sheet, do one tile at a time, let the wet blade do th work, pushing lightly

We fit a lot of this marble sheets,most of pieces is strong but some is easy to broke.Just remove the broke tiles and replace.

 

[Spud]

There is an easy way to cut these without breaking them you need to clamp another tile over the mosaic along the cut line they are breaking due to vibration so once another piece is holding them firm they will cut easier use a rail wet saw or a grinder with a sponge held at the back seat of the blade same as you might use a piece of wood over a sheet of glass mosaic when cutting with the grinder

 

[MTiler]

variable speed grinder may help. Dont try to cut them in one go, go over them a few times, not pressing down hard, using the weight of the grinder.

 

[GAZ5518]

Totally agree with Miss Tiler

 

[Terry the tiler]

I done a bathroom with these exact same tiles before Xmas, used my Dewalt d24000 went through them cleanly.

 

[Terry the tiler]

 

[Stevev]

variable speed grinder may help. Dont try to cut them in one go, go over them a few times, not pressing down hard, using the weight of the grinder.

Angle grinder???

 

[MTiler]

Angle grinder???

Yep

 

[GAZ5518]

I second that "Yep"