How can I border this ?

[schakal]

I made a mess with my bathroom tiles a while back and I want to put them right.
Photos tell it all pretty much. What are my options on making a border here that will not look bodged and out of place ?

I have enough extra tiles to continue to the right end of the wall but that wont achieve anything. I really want a solution inline with the glass screen bracket.

any opinions much appreciated

 

[WetSaw]

It's a bit difficult to see from the pictures but it looks like you've sponged the grout off too soon and taken too much from the joint. As for the edge, possibly a small aluminium angle siliconed over ?

 

[Blunt Tool]

I made a mess with my bathroom tiles a while back and I want to put them right.
Photos tell it all pretty much. What are my options on making a border here that will not look bodged and out of place ?

I have enough extra tiles to continue to the right end of the wall but that wont achieve anything. I really want a solution inline with the glass screen bracket.

any opinions much appreciated

View attachment 88801 View attachment 88802

Hi welcome to the forum 🙂 I would suggest taking off the shower screen bracket (it should be fixed to the tiles with screws and Silicon) then if it's an easy fix you are after, install a line of same tiles but on the vertical, one vertical will line up with two horizontals and install a white plastic or chrome trim to give a finish edge. Hope that makes sense!

 

[smokie899]

Don't see why you can't unscrew and move the frame over.
Doesn't look that big of a gap. There's usually around 10mm play for a profile. Then nice bead of Silicon to finish up the inside.

 

[Dan]

I'd also go over it with more grout perhaps. Make those joints look neater.

Then just move the thingy-me-bob over, or use a metal tile trim perhaps. www.protilertools.co.uk have loads of options for that kinda thing.

 

[Tile Shop]

thingy-me-bob

Lol, made me chuckle. Small things and all that.....

 

[schakal]

Don't see why you can't unscrew and move the frame over.
Doesn't look that big of a gap. There's usually around 10mm play for a profile. Then nice bead of Silicon to finish up the inside.

i cant move the glass screen unfortunately 🙁

 

[WetSaw]

Border tile?

 

[Mattybaby19]

i cant move the glass screen unfortunately 🙁

Could you post a photo of the internal corner of that bath/shower area, i tiling soon with those same beveled metros, and just wana see how it looks. Did u mitre cut the tiles or just straight cut them? Cheers

 

[WetSaw]

No disrespect to schakal but that's probably not the best metro tiling to take as an example!