Martyn Leeds
TF
I'd be over the moon with 2-3mm
Discuss Hollow Sounds and Space under edge of tiles? in the Canada Tile Advice area at TilersForums.com.
A little difficult as we took out a project with this construction to re-do the whole kitchen (strip out, flooring, tiling, UFH, re-plumbing, electrics, lighting and decorating) and some other jobs like replace our front windows and radiators.I would get a different tiler, some one proven who can do the job properly. Although you have Dural down, his fixing methods aren't going to change. The builder pulled one up in 10 seconds and I am not at all supprised.
Agreed if I have had to reuse tiles I've had to grind adhesive off the backSeriously Chris, look at that tile they have taken up, It's almost reusable. If the same tiler is tiling it again, with the same methods it's almost certain to fail imo.
All good then, well done in sticking to your guns to make sure correct procedures were followed even if it meant lifting what had been done already...too many come on here asking for help after its too late and jobs finished and paid forProgress pic of today.
Spoke to the main construction company owner today and he assured me to give the tiler another go and what needs to get done, will get done and if still not happy at the end of it they will re-do to get right.
So the Tiler today finished laying the dural dura matting, taped the lines and started to tile but this time was back buttering and bedding them down.
I watched a Bal Video of how to tile and it was more or less the same method the tiler was doing.
Hopefully things will go in the right direction now
View attachment 93248
Reply to Hollow Sounds and Space under edge of tiles? in the Canada Tile Advice area at TilersForums.com