B
benjchelt
Hi and thanks in advance for any help! I have fitted 12mm thick travertine stone walls on 12.5mm plasterboard with approx 3-4mm adhesive.
There is no way to get to any studs so I am looking at using spring toggle screws into the hollow wall behind. But with the combinations above there will be about 28mm between the cabinet (12kg empty, 4 fittings) and the back of the wall where the spring attaches. The spring toggles I saw suggested a 14mm hole for the spring and 3mm screw, so I am slightly concerned that there is an unsupported 10mm-ish gap horizontally around the screw between the cabinet and the wall.
Does this matter? Or is there a better method? Thanks.
There is no way to get to any studs so I am looking at using spring toggle screws into the hollow wall behind. But with the combinations above there will be about 28mm between the cabinet (12kg empty, 4 fittings) and the back of the wall where the spring attaches. The spring toggles I saw suggested a 14mm hole for the spring and 3mm screw, so I am slightly concerned that there is an unsupported 10mm-ish gap horizontally around the screw between the cabinet and the wall.
Does this matter? Or is there a better method? Thanks.