Grinder Blade for Mitre Tiles - How to mitre tiles using a grinder - freehand mitred tiles - Tile Advice

[Old Mod]

My Bosch variable should be arriving tomorrow from pro tiler tools, finally got round to it. Would you mitre wizards recommend the diamond pads over the sait pads? For performance and value for money ? Or diamond for porcelain, sait for stone polishing?

Stone, sait definitely for me.

Porcelain, you can use wet or dry diamond pads, but first choice would be the metal polishing disc from ATS.

 

[Ttt1601]

Stone, sait definitely for me.

Porcelain, you can use wet or dry diamond pads, but first choice would be the metal polishing disc from ATS.

I've got one of these Marc, what tread nut do you use to lock it to the grinder, I find my Milwaukee quick release, and the standard one both sit proud of the sanding plate

 

[Old Mod]

I've got one of these Marc, what tread nut do you use to lock it to the grinder, I find my Milwaukee quick release, and the standard one both sit proud of the sanding plate

Regular one that comes with the grinder, put it on upside down.

 

[Flintstone]

115mm Electroplated Diamond Grinding Disc | ATS Diamond Tools - http://www.atsdiamondtools.co.uk/node/132

This one? Similar to the montolit stl

 

[Old Mod]

115mm Electroplated Diamond Grinding Disc | ATS Diamond Tools - http://www.atsdiamondtools.co.uk/node/132

This one? Similar to the montolit stl

Errrrm yeah, but it's nothing like the STL andy, that's a different beast altogether.
The STL is a cutting blade as well as a polishing blade and very different to use.
I'll review the STL soon, as soon as I understand it a bit better.

 

[Mark Frost]

I had ago at polishing and I need more practice.. When I though my first attempt was good, I put a straight edge up against it I could of cried haha.

 

[Flintstone]

It's a different price too isn't it. I'm ordering tonight from ats so I'll get a couple of these

 

[Old Mod]

I had ago at polishing and I need more practice.. When I though my first attempt was good, I put a straight edge up against it I could of cried haha.

I did, I cried with laughter! Haha

 

[Flintstone]

What were you trying to polish mark?

 

[Old Mod]

It's a different price too isn't it. I'm ordering tonight from ats so I'll get a couple of these

Yes mate, a very different price, but it's a very different blade. It's much more versatile and a lot harder wearing.

 

[Mark Frost]

I did, I cried with laughter! Haha

so helpful haha @Localtiler a hard 10mm porc, not sure on the name of them

 

[Mark Frost]

@Localtiler I went over it again and then i was happy.. I enjoyed it just going to take some practice

 

[Old Mod]

What were you trying to polish mark?

He was trying to rectify a cut edge on a 10mm Florim, then realised very quickly, it takes a bit of practise.

 

[Flintstone]

My cat cat rectify 10mm florim!