Does tile mister delta board need priming - TilersForums.com

[acaciaguy]

Hello all

Does tile master delta board need priming before tiling on to?

Many thanks.

 

[Boggs]

Not for tiling to.

Here’s a link.

http://www.pcsboard.com/pcs/wp-content/uploads/2019/08/DeltaBoard-Stud-Fixing-Rev.08.pdf

 

[One Day]

My understanding is that Delta boards use a weird type of cement face (from Tilemaster) which only finally cures in contact with water in adhesive.
In other words, priming it will make a weaker bond than not priming it.
I know it sounds stupid but thats' what I've heard from Tilemaster.

(Personally though, I prime everything)

 

[Flintstone]

Strange that !
I prime when levelling but for walls I don't bother any more.

 

[J Sid]

Prime everything unless spec says not to and so far never seen anything say not to, always a first though

 

[acaciaguy]

Thank you for the replies.

Instructions doesn’t say primer is needed. Nor do they say not to it

 

[Dumbo]

Prime everything unless spec says not to and so far never seen anything say not to, always a first though

I'm with you unless it says under no circumstances what so ever do not even think about priming it , I prime everything

 

[J Sid]

Thank you for the replies.

Instructions doesn’t say primer is needed. Nor do they say not to it

If the boards doesn't say then follow the instructions from the adhesive manufacturer you are using.
If they give no advice then prime

 

[GoneGuy]

Same as the others I prime everything unless it says not to, then it’s usually a damp cloth to remove any dust off the boards

 

[Dumbo]

My understanding is that Delta boards use a weird type of cement face (from Tilemaster) which only finally cures in contact with water in adhesive.
In other words, priming it will make a weaker bond than not priming it.
I know it sounds stupid but thats' what I've heard from Tilemaster.

(Personally though, I prime everything)

I have heard the same of jackoboard as well