Bath not flush, chase long or short edge - TilersForums.com

[Mattybaby19]

Hey all,

My walls slightly out for the bath. If I push the short end flush with the wall the bottom end comes out 15mm away from the wall. I'm gonna chase the wall to fix this.

But am just wondering if it's best to chase the short or long end and why?

Thanks for your time

 

[Dumbo]

I would probably do a bit of both . Be carefull chasing in tap end to much as you might struggle for clearance between tap and tiles .

 

[Mattybaby19]

I realised I had no choice but to chase the long edge as otherwise the bath would be too close to the window when fitting a bathscreen.

Cheers again