floorboards

Flooring is the general term for a permanent covering of a floor, or for the work of installing such a floor covering. Floor covering is a term to generically describe any finish material applied over a floor structure to provide a walking surface. Both terms are used interchangeably but floor covering refers more to loose-laid materials.
Materials almost always classified as flooring include carpet, laminate, tile, and vinyl.

View More On Wikipedia.org
  1. M

    can you fix 6mm hardibacker over floorboards

    might sound like a daft question but ive only ever used the hardibacker boards over ply but ive been asked to go over floorboards with them. ive been on there website but cant find a answer thanks in advance for any advice
  2. P

    Tiling to floorboards

    Hi peeps had an enquiry about tiling an conversatory floor,which has floorboards,I'm I right in saying,I can glue and screw 6mm hardi backer board then tile onto?
  3. B

    Protecting floorboards in a listed building

    We will be tiling 3 bathrooms in a grade 2 listed building next month. Two of them are upstairs and have rather uneven old floorboards. As those boards are part of the "historic fabric" I cannot damage them with adhesive of any kind so I have to overboard them, again without adhesive. I think...
  4. S

    Floor with concrete and part wooden floorboards

    Has anyone prepped a floor for marble tiles that is 3/4 concrete screed and 1/4 wooden floorboards? Just looking for best case scenarios for levelling the whole floor prior to tiles going down. There's less than 1m2 of wooden floorboards at the doorway to the room, but each floorboard has a...
  5. C

    Tiling onto floorboards

    Hi guys. Got to do a small toilet floor only 1.7m x 1 m. The floor is floorboards which havebeen screwed down so very solid no deflecttion and surprisingly flat. I've got some left over ditra. Would it be ok to use this or am I best to hardi it? Tiles are 60x30 porcelain. Thanks
  6. A

    Floor prep

    Quick question for a general consensus please: I'm tiling a floor soon that is 18mm tongue and groove floorboards, overlaid with 18mm floorboards!!! God only knows why this is the case. The 2 layers of boards are not perpendicular, but the joins are staggered so they are not directly...
  7. B

    Old house, traditional pine floorboards, 6mm ply, plus Ditra

    are these sufficient to support a travertine tiled floor? Thanks!
  8. W

    Tiling Onto Floorboards

    Hi, I want to tile my bathroom floor, it's only a small bathroom and when i went to the Tile shop they recommended Hardier BackBoard. They said for me to use a flexible adhesive and screw this down to the floorbaords then tile on top etc... I'm just abit aprehensive about putting and adhesive...
  9. D

    Tiling Over Floorboards - Bathroom

    First of all, hello, I'm a newbie (have some rental properties which I work on) and am redoing our bathroom at home and creating an en-suite. After tiling the en suite myself I decided to employ a tiler to do the main bathroom (also my wife insists, quite rightly). I've had 3 tilers look at...
  10. macten

    Electric UFH 19m2 Mixture Of Concrete And Floorboards

    Tiles are parkers wood planks from Porcelanosa. Not seen job yet so lets assume boards and screed are level at this point. What prep/spec would you guys use?
  11. S

    Tiling Onto Floorboards

    Hi all, I want to tile a hall/kitchen floor. Carpet has been removed to now the area is tongue and groove floorboards. What do you guys do in this situation? Screw cement boards down or 6mm ply?
  12. A

    How Would U Deal With This

    Hi guys the last tiler that done the place tiled straight over floorboards and they crack all the time yearly or every 3 months..how would you reccomend that i cover this surface to tile on. Could i screw them down firmly then pour self leveling compound or rapid set cement on them? Or would...
  13. S

    Aqua panel onto floorboards

    Hi All, its my first post and i could do with a bit of advice please. laying a bathroom floor. i have just put down the 18mm floorboards, next is the aquapanel floor board. Do i need to prime the floorboards before applying the tile adhesive to then put the aquapanel on top?
  14. Dan

    Tile Adhesive for Floorboards

    It's been a good few years since I've tiled. And I'm not about to break that trend. But I was thinking about tile adhesive for floorboards after reading another thread and wondered what options are available now. It was only BAL Fastflex 2-part when I was tiling. But I believe now there are...
  15. A

    Floorboards and plywood

    Hi all hoping to get some advice. We want to lay quite abit of tiling downstairs on what is currently floorboards. The builder has put down 18mm plywood on the existing floorboards and is planning to put down a mesh with a layer of flexible adhesive. Then the tiles will be laid with another...
  16. M

    Small Strip of Hardie Backer on Floorboards

    Hello. I have to screw down Hardie Backer board on existing floorboards (with adhesive) for tiling first floor bathroom and toilet. The Hardie Backer is 800mm wide, the toilet is 830mm. Is it OK to have a 20mm strip of Hardie Backer on one side? I could not screw it down then. Or should I...
  17. Sean Kelly

    Ditra concrete floorboards

    Kitchen is currently floorboards and dining room is concrete. Both areas are level. Customer wants 1200x400 wood effect porcs to cover both areas (approx. 15sqm). I have not seen the job, but if the boards are sound and have no deflection, then could the whole area be Ditra’d (new word)...
  18. area tiling

    Tiling onto floorboards

    Finished this kitchen floor job today, and the client asked could I stick some grout in between the tiles in the utility room as the grout keeps cracking! It's not grout I told her you need its a complete re tile! Previous tiler has tiled directly onto the floorboards , with non flexi adhesive (...
  19. U

    Tiling travertine over floorboards

    I want to tile the upstairs bathroom floor with 300mm square trav. It's *not* a wetroom. The room is about 2m x 2.5m, with a lot of this covered by shower and bath. I've seen advice that says I should: 1. Overboard the floor with 15mm WBP - with lots and lots of screws. 2. Stick down 6mm...
  20. A

    Tiling on floorboards

    Hello everyone Im still at college got about 2 months left and im about to do my very first tiling job, kitchen walls and floor for my mother in law. The floor is floorboards and i know i need to put ply down, however i dont actually know the proper ins and outs of it all. Ive seen the no more...
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
Tile Contractor Forum. The useful tile contractor website.

UK Tiling Forum Stats

Threads
67,365
Messages
881,190
Members
9,530
Latest member
Apatel
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks