Tile Forum | America Tile Forum

Welcome to America Tile Forum, the USA Tile Industry. The Tile Association of America.

edge

Enhanced Data rates for GSM Evolution (EDGE) also known as Enhanced GPRS (EGPRS), IMT Single Carrier (IMT-SC), or Enhanced Data rates for Global Evolution) is a digital mobile phone technology that allows improved data transmission rates as a backward-compatible extension of GSM. EDGE is considered a pre-3G radio technology and is part of ITU's 3G definition. EDGE was deployed on GSM networks beginning in 2003 – initially by Cingular (now AT&T) in the United States.EDGE is standardized also by 3GPP as part of the GSM family. A variant, so called Compact-EDGE, was developed for use in a portion of Digital AMPS network spectrum.Through the introduction of sophisticated methods of coding and transmitting data, EDGE delivers higher bit-rates per radio channel, resulting in a threefold increase in capacity and performance compared with an ordinary GSM/GPRS connection.
EDGE can be used for any packet switched application, such as an Internet connection.
Evolved EDGE continues in release 7 of the 3GPP standard providing reduced latency and more than doubled performance e.g. to complement High-Speed Packet Access (HSPA). Peak bit-rates of up to 1 Mbit/s and typical bit-rates of 400 kbit/s can be expected.

View More On Wikipedia.org
  1. B

    Revers fitting of edge trim on window reveals

    Hi all. Just seen a previously tiled bathroom where the tiler rather than have the widest face of the trim facing outwards around the window reveal as normally fitted actually has fitted it so this side is within the reveal and just the 2-3mm edge is visible as you look at the window.(which...
  2. D

    Edge options for galaxy granite

    Hi all, I’ve got 8sqm of galaxy granite for a wet area in my barber shop. What are my options for the edging and do I need anything to edge where the floor will meet the wall and things like that, since it’s only a small area and a business I was wanting it as fancy as possible within a...
  3. L

    Tilers straight edge

    what do people use as a straight edge when you need one longer than a 6 or 8 ft level if any? I was wondering if a portable straight edge exists or does anyone have a home made version. Saw a few videos on Instagram from some Canadian tilers laying large format floor tiles with long metal...
  4. M

    Gap between Tiles and the edge of the room

    Hi I have had some tiling done in my kitchen and I would like some advice. A tile laser level wasn't used, meaning where the tiles meet the edge of the room, there is a gap. I think this will look stupid. The guy doing the work has suggested chiselling into the plaster and using a finely cut...
  5. P

    Copper square edge trim

    Hi does anyone know if you can get a copper square edge trim, and if so where from.Any help greatly appreciated.
  6. E

    My 1st Job Curbless shower fall edge detail

    Hello chaps, I've started a bathroom refurb & the current plan is to install a curbless 1200 x 900 shower with a single plane fall into a slot drain along the back. Wall on two sides, and a glass screen on the third. I have no idea how to deal with the sliver along the bottom edge of the...
  7. C

    Hollow Sounds and Space under edge of tiles?

    We are having our kitchen redone due to problems with our suspended flooring. As a result we have put a concrete floor down. We have just had our tiler start on the job - laying 40m2 of porcelain tiles (60*60) We have just inspected some of the tiles that were laid and have noticed that a...
  8. J

    Mitre cut metro tiles

    Hi I am having the kitchen splashback re-tiled and there are a couple of corners. I really don't like tile trim and so we want the tiles mitred. We plan to use metro tiles (flat rather than bevelled) but wanted to check these can be mitred. Our tiler said the tiles should be at least 8mm thick...
  9. J

    Is this an acceptable edge cut?

    We are currently having our bathroom renovated, and I am becoming increasingly unhappy with the finish of the grout and the tile cuts. The installer, who claims to be a professional tiler, says that is the best finish that can be achieved on a cutout, as it needs to be done with an angle...
  10. T

    Edge detail on Split faced Quartz

    Did this a while back but just got a close up to show the edges.
  11. B

    Chrome square edge tile trim repair

    Anybody know if the guys that repair scratches on baths, worktops etc can repair a scratch on 10mm square edge chrome trim? Customer from around a year ago phoned and told me he had an accident with a claw hammer as he was on a stool and hammer on loop scratched trim. He does have couple of...
  12. I

    Retrofit tile edge or caulk?

    Morning, I've tiled a splashback above my hob with metro tiles.brick bond 4 wide. This has left every other row with a half cut tile. Stupidly I didn't consider the edging prior to tiling. I'm wanting to get started on grouting and finishing the job but I'm not sure what will work best for the...
  13. M

    Bath not flush, chase long or short edge

    Hey all, My walls slightly out for the bath. If I push the short end flush with the wall the bottom end comes out 15mm away from the wall. I'm gonna chase the wall to fix this. But am just wondering if it's best to chase the short or long end and why? Thanks for your time
  14. Lou

    The Tiling Edge

    Whether you're tiling a bathroom, kitchen or living space, you'll need a professional tiler in Buckinghamshire to create that all important look that you're after. We have been fitting all different types of tiles for many years, for both residential and commercial clients. Kitchen Tiles...
  15. T

    Outer edge border tiling

    Hi Im looking for some suggestions/advice on how to tile a wall outer corner with the following border tile, images attached below. Can anyone recommend the best finish for these? Thanks.
  16. L

    Is this the best edge to expect on a cut ceramic tile?

    We have a bathroom renovation ongoing, and to cut a long story short I am not happy with the finish of the grout and the tile cuts. The installer (not a full-time professional tiler - yes I know, slap!) says that is the best finish he can achieve as it is a ceramic tile, and its because its a...
  17. F

    Roll up straight edge

    I've been on a job today and there has been a lad fitting kahndean flooring, multiroom, about 40m, anyway, been watching his prep as floor was bad, today he's been using these straight edges that are made of thin metal that roll up into a small roll, he had about 4 of them, from 2m to longest...
  18. T

    Tile Edge Trim

    I just cannot get my head around tile edge trim,having never used it. From what I have read you match trim to tile thickness. If you are using 8 mm tile you get a 9 mm trim which allows for 1 mm of tile adhesive and this is where I am confused. Say you are using a 8 mm notched trowel as wall is...
  19. M

    Grouting Square Edge Tiles

    Hi I have some tiles that I'm fitting in my bathroom and the edges are squared off not slightly rounded like i've previously had experience with. With rounded off edges when grouting my grout usually sits slightly set back in the tile recess but if i do this with these square edge tiles you'd...
  20. G

    Fitting Metal Edge Trim/tiles Around Window Recess

    Is there a technique for doing this with metal edge trim? Eg, is it best to tile the whole face of the wall, with all of the 4 window sides cut straight and square, being raised proud by a set distance to allow for the trim/adhesive and inner tiles to meet up squarely when fitted later? If so...
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
Tile Contractor Forum. The useful tile contractor website.

UK Tiling Forum Stats

Threads
67,371
Messages
881,208
Members
9,534
Latest member
Lowpaul22
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks