Which of these tile levelling systems to purchase. Cost Vs Quality - TilersForums.com

[Blunt Tool]

Can you get good part of the wedge through the clip on 10mm tile

Yes even on 15mm thick porcelain

 

[Balloo]

Thanks

 

[Wishiwasatoptiler]

No I've also got them 2mm and 3mm so that it acts as spacer aswell! I do take a small trowel (Raimondi olive) along edge of tiles to clear excess adhesive away! Think that makes a big difference and keeps tiles and joints clean

Will the PLM plier set work with these clips?

 

[Blunt Tool]

Yes they are all the same

 

[Italy]

I use chips and fish as a wedge....
assured savings

 

[BILL HOLDER]

Tile Levelling Spacers and clips for Raimondi Levelling System 1.5mm Qty 2000 | eBay - http://www.ebay.co.uk/itm/Tile-Levelling-Spacers-and-clips-for-Raimondi-Levelling-System-1-5mm-Qty-2000/272566879678?ssPageName=STRK%3AMEBIDX%3AIT&var=571674331339&_trksid=p2057872.m2749.l2649

 

[Italy]

Tile Levelling Spacers and clips for Raimondi Levelling System 1.5mm Qty 2000 | eBay - http://www.ebay.co.uk/itm/Tile-Levelling-Spacers-and-clips-for-Raimondi-Levelling-System-1-5mm-Qty-2000/272566879678?ssPageName=STRK%3AMEBIDX%3AIT&var=571674331339&_trksid=p2057872.m2749.l2649

FOR raimondi.
it is not raimondi.

 

[BILL HOLDER]

FOR raimondi.
it is not raimondi.

No but I've had them recommended on tiler forum facebook and we used them the first time and they worked great.

 

[Balloo]

Pony level system was good value. made by same company as Mustang,
direct from Arttros in spain at €100 for 5000 clips then had to buy from different supplier at €198 then was told that a company in uk was sole supplier for uk and Ireland and price jumped to £495 .

 

[Balloo]

Perfect level master is by far the best quality , but all these products newd to be reduced in price they are far to expensive for what they are .
I contacted a company to make the tool for mould it would cost around £5000-£6000 to make and then the plastic clips and wedges would be 1p per unit , this shows the dramatic mark up .