What is your choice for retro fit wet ufh

[J Sid]

There are many different types out there, I have one I recommend.
Which one do you lads recommend / fit and is it different for different substrates?

 

[Old Mod]

I can honestly say I’ve never been asked to spec one Julian.
Last time I even supplied an electric ufh system was 2016, and I’ve fitted less than half a dozen since then. 🤷🏻‍♂️

 

[J Sid]

Thanks Marc

If a customer needs retro wufh or electric I
try and spec what I like and if it.
Had a large job last Xmas, 100m2 plus, boards and wire. Spar wanted to supply and fix, I gave clear instructions on what I need to tile it. He didn't think he would bother to tape boards or seal boards before slc. I turn up to a crazy paving floor with slc coming up. Customer wasn't happy when I said I would tile on that. Found some to tile it 3 weeks before Xmas.
So, unless it's done by me or I see it being done by others I won't do the tiling.
Think we all know what I normally use for wufh, just wanted other options and see what other recommend.
[automerge]1570353945[/automerge]

 

[Dumbo]

Sparks don't have a clue about what is necessary
[automerge]1570355764[/automerge]
I've never tiled a wufh panel system so cannot offer anything but this is a worthwhile question .

 

[Old Mod]

I know there are companies out there now actually routing out the top of a screed to lay pipes directly in.

 

[Dumbo]

I know there are companies out there now actually routing out the top of a screed to lay pipes directly in.

I like the sound of that .

 

[J Sid]

I've done that in small areas marc with electric ufh wires.
The job I'm pricing as type is reto wufh on gypsum screed in a old cottage with no floor insulation, so going for a installation boards type.

 

[Bopster]

I have solfex wufh overlay in my own house and done a couple of the same system for my customers.
Never had an issue and very competitive

 

[J Sid]

I have solfex wufh overlay in my own house and done a couple of the same system for my customers.
Never had an issue and very competitive

Just been looking at there site, no much info there🤔 did you fix tiles to it? If so it looks like they say fix to 6mm ply😳 but not clear at all. It's also a floating floor which I'm not at all keen on tiling onto

 

[Bopster]

its the usual gypsum panels free floating and glued together, screwed down plastic end sections. Then ditra matting and tiled.