variable speed makita grinder - Tile Advice

[Spud]

used one this morning best piece of kit I have seen for a while and is now number one on my wish list love the soft start feature and adjustable speed outstanding piece of kit

 

[Diamond Pool Finishers]

do you have a link to it then gaz !.....thanks Dave

 

[Concrete guy]

They are very good pieces of equipment. So many of my mason customers have one of these on the shelf as they are so versatile.

There is quite a variety though so make sure you check out the speed range, some are 2800-11000 others are 2800-6000.

Go with 125mm (5") as it opens up the variety of blades/tools you can stick on them.

 

[gamma38]

i bought one a couple of weeks ago gary, the 9565 cvl from stonetools, it's one of my new favourite tools.

 

[Spud]

the guy who had it Dave dose a lot of mosaic and says slowing the speed down stops the glass from shattering when cutting the sheets , made alot of sense and he is an outstanding tile fixer http://www.ebay.co.uk/itm/Makita-95...25MM-ANGLE-GRINDER-AND-POLISHER-/390370218852

 

[Dan s]

That looks like my wet polisher (minus water feed) so am I right in thinking I don't need one of these as well ?

 

[White Room]

They are very good pieces of equipment. So many of my mason customers have one of these on the shelf as they are so versatile.

There is quite a variety though so make sure you check out the speed range, some are 2800-11000 others are 2800-6000.

Go with 125mm (5") as it opens up the variety of blades/tools you can stick on them.

Which would be the choice out of the different speeds....