Sigma 9m6 How Big - TilersForums.com

[gamma38]

I have, would you be interested in the beast then?

 

[Old Mod]

I have, would you be interested in the beast then?

What can I say........ You're a man after my own heart Paul!

 

[Chalker]

How much are you looking for Chalker??

About £650 with three blades.

 

[JayTiler]

Thanks guys. Looks like the 10m is good saw do the have the dimensions of each of the three parts it breaks down to. Where abouts are you chalker

 

[Chalker]

The sliding table is the largest bit. I keep it at my lockup a few miles away. Will try and get there today and measure up.

From memory the sliding table is about 30 in x 20 in
The motor table is about 2 ft x 14 in and about 15 in high
I have a pic of the stand below.

I live in North yorkshire. Closest town is Tadcaster, 3 miles away.

 

[Versatile]

How old is the machine .
Has it been hammered or used as a back up on stone ect
What blades are you putting with it
Thanks

 

[Chalker]

About 2 1/2 years old looked after and not been heavily used.
Blades are 2 Ats and one marcrist .