Serious Problem With Tx700 - TilersForums.com

[Ian]

I don't know where to begin with this issue, I'm so distraught I can barely see my computer screen through the tears. I've been happily using this cutter for 4 years now and have never had a problem cutting 600x600mm tiles in half (best cutter on the market for this job) but, today I scribed a 10mm sliver and it cut it perfectly, no visit to the wet saw or grinder outside. I thought only Sigmas could do this! Can someone please shed some light on this and tell me what's happened? How do I fix it, I'm worried about looking like a right mug in front of my customers. Yours hopefully, cry baby Bri

 

[Unused Account 1]

Was going to get the sigma ,but think ill. Just stick to tx bri

 

[White Room]

Must be really thin tiles bri

 

[Andy Allen]

Obviously B&Q Tiles then....

 

[Unused Account 1]

Haha

 

[Dave]

Pffft , a paper clip would cut those tiles , there's me thinking it was a serious test lol lol...

 

[peteablard]

I wouldn't be bragging if it's taken 4 years of trying to finally accomplish it!

 

[mma]

Fluke!

 

[StevieBoy]

You wouldn't have done that with those tiles I was using a few weeks ago from Porcelenasa.
They do vary a lot though in strength, as I have done a floor this week using polished porcelain tiles, and on the side of them it stated:

MADE IN CHINA

Needless to say, they did not take much breaking as I used my cheapo tilemate pro big clinker 630 from Topps for this job!

 

[AliGage]

I had these a few weeks ago and my TX700 wouldn't snap them!

Mimica Arabescato Gloss Wall & Floor Tiles | Mandarin Stone Wall & Floor Tiles

 

[judge]

And then I woke up !!!!!!!!

 

[kevsalt]

i just love my tx s ,,theyl do for me ..you can keep them sigmas ..no direct vision of the score line ..massive guide bar ...expensive arms and wheels ...sorry not for me

 

[Colour Republic]

that's 12mm all day long and you know it

 

[Dougs Third Go]

I had a similar problem this week @Bri with my TX1200 and some 900x150 porc planks .....( )

 

[Unused Account 1]

I don't know where to begin with this issue, I'm so distraught I can barely see my computer screen through the tears. I've been happily using this cutter for 4 years now and have never had a problem cutting 600x600mm tiles in half (best cutter on the market for this job) but, today I scribed a 10mm sliver and it cut it perfectly, no visit to the wet saw or grinder outside. I thought only Sigmas could do this! Can someone please shed some light on this and tell me what's happened? How do I fix it, I'm worried about looking like a right mug in front of my customers. Yours hopefully, cry baby Bri
View attachment 77031

Bri have you had any porcelain it wouldnt snap