sbr primer - TilersForums.com

[niallfenelon]

just going to prime my concrete kitchen floor with ARC sbr bond before tiling. do i just put it on neat with a paint brush or do i have to water it down or mix it? thanks

 

[diamondtiling]

Welcome to the forum.

Its usually 3-1, what do the manufacturers suggest on the bottle?

 

[niallfenelon]

it says to mix 1 part sbr with 1 part neat cement to make a slurry and and put on with brush. just never heard of that before.

 

[DHTiling]

That is for a slurry coat, to prime then 4:1 Water/sbr ratio..

 

[niallfenelon]

nice one. cheers lads.

 

[The Legend; Phil Hobson RIP]

Hi and:welcome:

 

[faithhealer]

welcome to the forum

 

[White Room]

Hi and welcome

 

[david campbell]

:welcome:to the forum

 

[EFC Mike]

:welcome:

 

[Jeff widnes]

Hi can I use Febond SBR to seal a plywood floor before tiling.?

 

[Dave]

Hi can I use Febond SBR to seal a plywood floor before tiling.?

I’m afraid standards have changed and tiling to ply isn’t recommended anymore