Random tiles percentage - TilersForums.com

[Leroy Brown]

Evening all. Thanks for all the advice. The Tiler said he wanted 8mm trims and that's what he got.

I agree, I don't like bevelled ( not levelled) tiles.

Enjoy your evening.

 

[Albert]

You disagree @Albert , care to share your thoughts too?

My thinking was that you had to cover the cut edge hence
the disagree. I may have picked you up wrong

 

[Albert]

No.............. the trim should be for the thickest part. An 8mm trim will be good.

I've never seen a 4mm trim!

You can get 4mm trim from most suppliers, normally special order.

 

[Sean Kelly]

You can get 4mm trim from most suppliers, normally special order.

Thanks Albert, I did Google 4mm trim the other day and found nothing. I Googled again today and eventually found them !!! I've still never seen one though!!!

 

[Albert]

Thanks Albert, I did Google 4mm trim the other day and found nothing. I Googled again today and eventually found them !!! I've still never seen one though!!!

Schluter does them.

 

[Leroy Brown]

Glad some other people are getting advice from this thread.

Not sure if you guys will know but sure you use levelling compounds a fair bit. I am installing 6mm ply over floorboards for a vinyl man to lay his floor. I am looking for something to fill the gaps between the cuts that I make and possibly any screws that go down too deep. Any recommendations?

 

[Dumbo]

Ardex feather finish . It's like a filler very easy to use . Fast setting and easy to rub down .

 

[Leroy Brown]

Ardex feather finish . It's like a filler very easy to use . Fast setting and easy to rub down .

Thank you.

I was hoping for an alternative as it is pricey!!

 

[Dumbo]

Thank you.

I was hoping for an alternative as it is pricey!!

It works well .

 

[Leroy Brown]

Ah ha. Where can this be purchased rather than online

 

[Dumbo]

Nutlands if you have one near you .

 

[Leroy Brown]

Nutlands if you have one near you .

Actually never heard of them