Ragged edge porcelain tile - advice pls

[bluecazzaf]

Hi - I am new to the Forum - thanks in advance for any advice given. What do the pro's suggest for tidying up this ragged cut tiling underneath our bathroom window? I wondered whether Silicon would be used? I fear the grouting has already been done and this may therefore be the best our team are so far able to do. I just want to know what to expect and maybe to request. Thanks again.

 

[Gazzer]

Hi bluecazzaf and welcome to tilersforums.com 🙂

 

[Bubblecraft]

Hi & welcome to TF. Can't see the picture but it sounds like a flat bed has done the cut at the window & not a wet saw. If possible, I'd remove it & replace with a wet cut tile IMO.
Is this work that is currently being done for you? If so, tell them to replace it with a wet cut tile.

 

[kilty55]

hi there,if the cut butts up against a cill you may be able to form a Silicon joint to hide it......the better option is simply to remove the tile and re cut it

 

[White Room]

Hi and welcome......

 

[Diamond Pool Finishers]

:welcome: to the forum

 

[bluecazzaf]

Thanks very much for the responses - much appreciated.

 

[cam_low]

Hello from Woodford Green !