Opions on 3 way mitres

[One Day]

Even if you could do that, you'd then probably want to do the same on the horizontals and double up all over. Would look pap imo!

 

[One Day]

Three way perfils. That'd please him!

 

[John Benton]

For your pleasure Ash

 

[Mr Tiler]

you cant do that in the other pics situation tho can you. and I see where you guys are coming from now thanks john appreciated mate

 

[John Benton]

you cant do that in the other pics situation tho can you. and I see where you guys are coming from now thanks john appreciated mate

As CR said you can only achieve this with square trim and you can either mitre the vertical or horizontal corners, I prefer the cubes personally

 

[One Day]

Or you can try this:

 

[charlie1]

L

 

[Peter]

Instead of mitring the top edge, just cut the back out in a 'v' and bend it around a tile corner to a 90* angle!
Young John and I were initiated into this style of finish 6 years ago in the South of France when we were shown how to do a staircase by the job foreman (Mel a tiler from Northumberland) - when I learn how to put photos on here from my phone I'll show you.
Since we have been using this method of trim finishing it has been exceptionally well received!

How far do you cut the V into it John? Sounds like the way forward, those points can be nasty, especially on an external corner of skirting.

 

[Time's Ran Out]

Practise! But so it will bend without splitting.