Leveling insulation boards

Tilers Forums Official Sponsors

T

TJ Smiler

Hi all

Anyone know if it's possible to flatten/level out a 28m2 floor using 6mm insulation boards?

Customer is having UFH, his current substrate is concrete and it is pretty all over the place with plenty of high and low spots...... was gonna get rid of some of the high spots using my grinder and then SLC the low spots before fixing the boards, i then wondered if it possible to avoid this stage and just pack the boards out and level with them (tiles are gonna be 600x600 porcs)

Your opinions would be appreciated?

Thanks
Toby
 
Do you mean concrete or screed ???

Well it's actually a mixture of both.......very old house with a an extension built about 25 years ago. The old stuff is concrete and the newer is screed. With a bit of SLC in spots for good measure
 
Well it's actually a mixture of both.......very old house with a an extension built about 25 years ago. The old stuff is concrete and the newer is screed. With a bit of SLC in spots for good measure

The reason I asked is that quite a few call screed concrete, that is a pet hate to be honest...it's just me though:smilewinkgrin:
 
The reason I asked is that quite a few call screed concrete, that is a pet hate to be honest...it's just me though:smilewinkgrin:

No it's not just you mate... It is also one of my pet hates along with people who call a concrete mixer a cement mixer....
 

Advertisement

Thread Information

Title
Leveling insulation boards
Prefix
N/A
Forum
Australia Tiling Forum
Start date
Last reply date
Replies
8

Advertisement

UK Tiling Forum

Thread statistics

Created
TJ Smiler,
Last reply from
peteablard,
Replies
8
Views
3,435

Thread statistics

Created
TJ Smiler,
Last reply from
peteablard,
Replies
8
Views
3,435
Back