Leveling Compound Failed

[J Sid]

Remove yes....
Could be old batch.
Could be laid and not bonded well to unprimed insulation boards with foot traffic breaking it up.
Needs sorting before redoing or it will happen again

 

[Millington Deco]

Customers son works for a builder who did it, unsure of brand, method of application etc. I will recommend he contacts the builder to rectify the floor.

 

[J Sid]

So build did the prep.... Run Forrest run

 

[Just Rizzle]

some one hasn't tread the instruction on the bag if you follow there mix ratios it wont fail also important to seal the floor with suitable primer befor laying

 

[Millington Deco]

Don't think primer will make any difference to this.

 

[Just Rizzle]

the wires are exposed which is a good thing . can you pull up he wires then scrape the floor then relay wires and start again?

 

[Just Rizzle]

are you sure hes put water in it has he just poured it out the bag and levelled the compound?

 

[hmtiling]

Are you back to mesh on the insulation board?
'Orange Juice' for me!

 

[On one]

If that's the state of the EUFH what else has he naused up

 

[hmtiling]

'my builder said he could do it'!!!!!