W
Whooshman
Hello All,
I’m looking for some advice regarding expansion joints as I am planning a large floor around 110 sqm- I have attached the layout.
The tiles will be Porcelain, 600 x 600
The sub floor will be 18mm ply in all areas except in the dining room (dining room is the 26sqm area on diagram) and conservatory which are concrete screed.
My thoughts were to put Expansion Joints in the following areas:
WM
(Background: I have around 8 years experience but have never tiled a floor the size I’m asking about)
I’m looking for some advice regarding expansion joints as I am planning a large floor around 110 sqm- I have attached the layout.
The tiles will be Porcelain, 600 x 600
The sub floor will be 18mm ply in all areas except in the dining room (dining room is the 26sqm area on diagram) and conservatory which are concrete screed.
My thoughts were to put Expansion Joints in the following areas:
- At the toilet door
- Between the main hall and the walkway
- At the door to the utility room
- Between the walkway and the dining room
- Between the walkway and the conservatory
WM
(Background: I have around 8 years experience but have never tiled a floor the size I’m asking about)