The envelopes should be cut out of the bond you already have on the main floor, looks like you've got a 100mm cut running down rh side, this should be followed through to the tray, is it all stuck down or could you rethink the whole floor set out?
Can't see much evidence of tanking around the wet area?
I have not stuck em all yet this is as far as I have got alot of work gone into the floor so want it looking good I am a trusted advisor on the ukplumbing forum been on there for a good few years but got directed to you guys for a bit of proffesional advice regarding this cheers Wayne (aka kop)
Sorry guys still there i didn't flood that area slopes are still there you can see em on the marked out picture confident on the tiling just need to get back to the bond in the nestest way thought you guys may have few ideas ? if not will do the the remainder first and work out some cuts to get me back ? All the best Kop
Yes I see your predicament now - you’ve centred the outlet with a joint!
So as you say you’ll have to recut away to the side to continue the bond line of the tile widths. May have been a larger cut to both side walls with a tile centred on the drain outlet and then to follow the bond up the walls.
It’s always a personal decision in the end. Unless your working for an engineer or architect, then anything whimsical can happen.
Better apolgise for not being an active member for a couple of years.
As per title, looking for recommendations please. Tired of so much chinese tat and should ask on here.
I need a few as I have...
Join The Tile Association and Get Noticed
Some time ago joining The Tile Association may have got your tile business noticed, but it wouldn’t have helped your website much, as the Tiles.org.uk...
Norcros sells Johnson Tiles UK
Bathroom and kitchen products provider Norcros has finalised the sale of its subsidiary, Johnson Tiles UK. The sale for £1m to its UK management team comprising...
This is the Morning Thread for Plumbers Forums Discussion Thread
Come get a sense of community by joining in the forum Morning Thread. We have this running on all our forums and it’s a brilliant...
This is the Morning Thread for Tilers Forums Discussion Thread
We have a Morning Thread on each of our forums, and the Tilers Forums Morning Thread has been running the longest, we’ve actually...