Do I grout the cuts in my pre-cut tile? - TilersForums.com

[Zedox]

Ive laid this tile in my bathroom

Ornamental Girona Blue 450x450

Buy Ornamental Girona Blue 450x450 at Tile Giant. Get free delivery on orders over £250 or Click & Collect in store.

www.tilegiant.co.uk

It’s been pre-cur to give the illusion of being 4 smaller tiles.

Do I grout in the pre-cut lines? Someone told me to avoid that as it didnt look deep enough but surely the tile is designed to be grouted in the cuts.

 

[Dan]

If it has glaze on the (fake) joint I don't think you will do. Just zoomed in on the pic of the tile and I think you're meant to not grout that part. And match it as best you can with the same mm tile spacer and grout that with white grout.

 

[Time's Ran Out]

I think same as @Dan but looking at the picture I’d go for a lighter grout to match the tile.

 

[GoneGuy]

these are normally made to be grouted, sometimes they are glazed over so can’t be grouted.
Best to mix a small bit of grout and try on a spare tile and see if it stays in the joint

 

[hmtiling]

If not glazed some grouts work better than others as the fake joints aren't that deep. Mapei ultra colour plus would be my choice.

 

[Tony_C]

Ditto on Mapei Ultracolour, i used the manhattan grey not long ago on similar tiles and it took to the false grout line ok.

 

[GoneGuy]

I’ve used mapei ultra color on those small grout joints and they stay in there