Rhys Allison
TF
- Reaction score
- 0
Hi all,
Firstly I would like to say this forum has a lot of useful content, I’ve found it extremely helpful over the past few weeks as a diy tiler.
I’ve installed an electric ufh mat and put down a suitable self levelling compound. The compound is pretty much dry and I’ve noticed in some areas the cable has little coverage although it’s not completely exposed.
The floor is going to be tiled ensuring there is a full bed of adhesive.
Shall I put another layer of slc on to ensure the cables are completed embedded or will it be ok with going over the top with the tile adhesive?
Tia
Firstly I would like to say this forum has a lot of useful content, I’ve found it extremely helpful over the past few weeks as a diy tiler.
I’ve installed an electric ufh mat and put down a suitable self levelling compound. The compound is pretty much dry and I’ve noticed in some areas the cable has little coverage although it’s not completely exposed.
The floor is going to be tiled ensuring there is a full bed of adhesive.
Shall I put another layer of slc on to ensure the cables are completed embedded or will it be ok with going over the top with the tile adhesive?
Tia