Bathroom & Kitchen Floor Tiling

[rubblelfc]

Hi all, I'm new to this and I'm looking for some advice. I have a bathroom and kitchen floors to tile in my own house and was going to give it a bash myself so your advice would be much appreciated. The bathroom is 3mts2 on floor boards and kitchen 9mts2 on concrete floor. I have bought 6mm plywood for the bathroom and the kitchen seems level but would I still need plywood in the kitchen? I have also bought starlight quartz tiles and mapei glitter grout plus kerapoxy design so would I need to put anything on the tiles to seal before grouting if so could you recommend anything?
Thanks for your help and I look forward to hearing from you!!

 

[Gazzer]

The 6mm ply for the bathroom floor is insuficient. Its either 15mm or 6mm cement tile backer board. The existing floor still needs to be suitable before over boarding with the backerboard by making sure all boards are screwed and there is no bounce/movent in the existing floor.

 

[kilty55]

hi rubble,6mm ply is too thin for the bathroom you would be better using 6mm cement boards instead or 18mm plywood

concrete for the kitchen is Phone you dont need to over board this,tiles need sealed yes


if im honest and this is your 1st tiling job if i was you id get a pro in to do it,,these tiles are expensive and so is glitter grout and both are difficult to work with especially as a 1st job

if you use a pro,they may be able to get you discount on tiles mats etc,,and as well if your gonna do this job you will need a good wet cutter

 

[rubblelfc]

I think you could right here ha ha I'm starting to get worried about it not!!

Thanks for the quick replies and will try and get in contact with a professional around Kilmarnock.

What kind of sealant would be best to use for this application?

 

[aph257]

Hi &:welcome:. as others have already said its a difficult job for a 1st timer. So if you want a pro tiler post your request here: I'm Looking for a Wall and Floor Tiler . Good luck either way.

 

[david campbell]

i think this is defo a big job for a first time,the tiles will need sealed before and after grouting with a polished tile impregnator,they will all need wet cut and a decent saw and blade is needed for these as they are tough tiles,as above 6mm ply is not suitable either 15mm ply or 6mm cement boards

 

[White Room]

Hi and welcome