Bath panel????

[AliGage]

Silicone?

 

[lizzardtong]

Silicone?

Well my weapon of choice is foam. But from economy point of view foam works out cheaper. 1 can of foam is about £5 and you can do a lot of work with it.

 

[Ajax123]

What about wedging it in with expanded polyethylene foam 5mm or 8mm. That wouldn't need cutting. It would just slide out... Just an idea

 

[widler]

I just wedge and silicone.
Personally, if its done right it shouldnt need access.
I read a thread on swedish mikes forum, that man is loon balls, he says he would recommend EVERY water joint to have a access panel , EVERYWHERE , imagine all over your house, access panels in ceilings, walls and floors , unless i read it wrong this is what i thought he was saying, i think rob(CR) was having a bit of a 'debate' on it

 

[Perry]

This is what I started doing thirty years ago, still have no problems.

http://www.tilersforums.com/members/pjc-albums-dewalt-picture33800-2011-09-22-17-50-37-a.html

And then silicone the joint like this.

http://www.tilersforums.com/members/pjc-albums-dewalt-picture33801-2011-10-07-12-18-07-a.html

 

[lizzardtong]

This is what I started doing thirty years ago, still have no problems.

http://www.tilersforums.com/members/pjc-albums-dewalt-picture33800-2011-09-22-17-50-37-a.html

And then silicone the joint like this.

http://www.tilersforums.com/members/pjc-albums-dewalt-picture33801-2011-10-07-12-18-07-a.html

That kingdom of dewalt on the back of the van is it yours?

 

[Perry]

That kingdom of dewalt on the back of the van is it yours?

No it’s a friend of mine. He does a lot of exhibitions for them.

 

[stephenoneill]

I always use wedi panels and their acess panel fitting is simple and quick to fix

 

[Fliselege]

As a human, SwedishMike is a complete goon that would benefit from a good hiding. However, I live in Norway specialising in wetrooms, and if regulations are same in Sweden as they are here, he's right. Every water joint inside a wall must have an inspection hatch, end of story.

 

[John Benton]

As a human, SwedishMike is a complete goon that would benefit from a good hiding. However, I live in Norway specialising in wetrooms, and if regulations are same in Sweden as they are here, he's right. Every water joint inside a wall must have an inspection hatch, end of story.

And if you see the plumbing in some of the new build now every joint should just be left visible!!!!!