Anyone got their eye on a piece of kit from Santa? - TilersForums.com

[Blunt Tool]

Wife and kids dont know what to get me for Xmas and it’s my Birthday on Hogmanay so I’ve been hinting!! I’ve been contacted 6 times this year by insurance companies go have a look at failed UFH installs and do paid reports and quote. So I could justify it if continues next year?
FLIR ONE Pro Thermal Imaging Camera for Smartphones | FLIR Systems - https://www.flir.co.uk/products/flir-one-pro/?utm_source=social&utm_medium=facebook&utm_campaign=32.00.E.FB.FLIRONEUKECommerce

 

[Andy Allen]

Not cheap, is it....!
Your wife isn't Scottish then...

 

[Blunt Tool]

Not cheap, is it....!
Your wife isn't Scottish then...

Money from wife and kids and money presents from family for Xmas and birthday should just about fund it or I could get a micro loan?

 

[Spare Tool]

Interesting..how's that work then if the wires are broken and cold?
I've heard there's ufh repair companies that put a large voltage through the ufh cables and find the break somehow?

 

[Blunt Tool]

Interesting..how's that work then if the wires are broken and cold?
I've heard there's ufh repair companies that put a large voltage through the ufh cables and find the break somehow?

Sometimes you get lucky Andy and the heating will go on for a while then switch off suddenly but it will leave a heat signature

 

[Blunt Tool]

Interesting..how's that work then if the wires are broken and cold?
I've heard there's ufh repair companies that put a large voltage through the ufh cables and find the break somehow?

Other times when not so lucky electrician will check continuity of cables and sensor then if still no fault found disconnect sensor and thermostat and run current thru cable and use a live voltage detector

 

[Spare Tool]

Ah right, sounds a lucrative market....as long as builders, sparkies plumbers and joiners are installing ufh sure they'll be a constant flow of work

 

[Blunt Tool]

Ah right, sounds a lucrative market....as long as builders, sparkies plumbers and joiners are installing ufh sure they'll be a constant flow of work

I cannot do the electrical side only play with controls etc see if I can get it to run a while, after that electrician must come to help me

 

[Blunt Tool]

The most common fault I have found is the very end of wire burnt out as overheated and not enclosed in screed as tape over it creating a pocket

 

[Spare Tool]

Usually either the end or the join to the cold tails gotta be the first point of call..