110v Wet Cutter - TilersForums.com

[Scoott22]

Can someone recommend a good 110v light weight wet cutter for kichen contract?

 

[DHTiling]

Hello scoot and welcome..


try this one...


Rubi ND 200


Although Rubi make some smaller flat bed saws, they are not very powerful. This is the best bet for the professional

• 40 mm depth of cut
• Stainless steel bed
• 0 - 45 deg mitre (can cut both sides of wheel)
• Sliding guide from 0 to 500 mm from wheel
• Blade guard and stem simply pull out for plunge cutting (to remove sections of the centre of a tile i.e. for sockets)
• Comes with reasonable quality diamond wheel
• Motor: 880w.....110 v or 240 v
• Wheel size - 200mm diameter 25.4mm bore
• Weight 15 Kg

The diamond wheel that is supplied with this machine is suitable for general ceramics. If you are cutting porcelain, granite marble and travertine etc then the Marcrist CK850 diamond wheel is highly recommended - See our 200mm diamond wheels section.

CHOOSE VOLTAGE BELOW


Video of ND-200 in action


Tradetiler Wet Tile Saws

 

[faithhealer]

Hi Scoot, a long time waiting for your first post. Check out Tradetiler, most of his saws come in 110 as well as 240

 

[White Room]

I have one of the nd200 110v with marcrist blade, great cutter

 

[Scoott22]

Cheers for that, Just cannot believe how little choice there is for 110v cutters on the the market!!

 

[DHTiling]

TT used to sell the plasplugs as well , perfect for site work but sadly plasplug are no more...